ATC2000
World Precision Instruments
3
NOTE
: You need a heating plate (not included) and a probe (not included) to use the
ATC2000
. For accessories, see “Accessories” on page 14.
An optional silicone pad (WPI #
503573
) is available for use with the
ATC2000
. It is
composed of a thermally conductive rubber material that is used to enhance the heat
transfer to the animal. Simply place the silicone pad on the
ATC2000
warming plate
and place the animal on silicone pad.
Fig. 3—The 503573 Silicone Pad, an optional accessory, can be placed under the animal to
enhance the heat transfer from the ATC2000 plate to the animal.
Unpacking
Upon receipt of this instrument, make a thorough inspection of the contents and
check for possible damage. Missing cartons or obvious damage to cartons should be
noted on the delivery receipt before signing. Concealed damage should be reported
at once to the carrier and an inspection requested. Please read the section entitled
“Claims and Returns” on page 19 of this manual. Please contact WPI Customer
Service if any parts are missing at 941.371.1003 or [email protected].
Returns:
Do not return any goods to WPI without obtaining prior approval (RMA
# required) and instructions from WPI’s Returns Department. Goods returned
(unauthorized) by collect freight may be refused. If a return shipment is necessary,
use the original container, if possible. If the original container is not available, use a
suitable substitute that is rigid and of adequate size. Wrap the instrument in paper or
plastic surrounded with at least 100mm (four inches) of shock absorbing material. For
further details, please read the section entitled “Claims and Returns” on page 19 of
this manual.
INSTRUMENT DESCRIPTION
How it Works
The
ATC2000
uses a digital PID controller to regulate the application of power to the
heating plate to achieve the desired temperature at the monitored sensor. PID stands
for Proportional, Integral and Differential. The control mechanism is illustrated below.
Summary of Contents for ATC2000
Page 2: ......
Page 4: ...ii World Precision Instruments...
Page 20: ...16 World Precision Instruments DECLARATION OF CONFORMITY...
Page 22: ...18 World Precision Instruments...