WPI ATC2000 Instruction Manual Download Page 23

ATC2000

World Precision Instruments 

19

* Electrodes, probes, batteries and other consumable parts are warranted for 30 days only from the date on 

which the customer receives these items.www

WARRANTY

WPI (World Precision Instruments, Inc.) warrants to the original purchaser that this equipment, includ-

ing its components and parts, shall be free from defects in material and workmanship for a period of 

one year* from the date of receipt. WPI’s obligation under this warranty shall be limited to repair or 

replacement, at WPI’s option, of the equipment or defective components or parts upon receipt thereof 

f.o.b. WPI, Sarasota, Florida U.S.A. Return of a repaired instrument shall be f.o.b. Sarasota.
The above warranty is contingent upon normal usage and does not cover products which have been 

modified without WPI’s approval or which have been subjected to unusual physical or electrical stress 

or on which the original identification marks have been removed or altered. The above warranty will not 

apply if adjustment, repair or parts replacement is required because of accident, neglect, misuse, failure 

of electric power, air conditioning, humidity control, or causes other than normal and ordinary usage.
To the extent that any of its equipment is furnished by a manufacturer other than WPI, the foregoing 

warranty shall be applicable only to the extent of the warranty furnished by such other manufacturer. 

This warranty will not apply to appearance terms, such as knobs, handles, dials or the like.
WPI makes no warranty of any kind, express or implied or statutory, including without limitation any 

warranties of merchantability and/or fitness for a particular purpose. WPI shall not be liable for any 

damages, whether direct, indirect, special or consequential arising from a failure of this product to 

operate in the manner desired by the user. WPI shall not be liable for any damage to data or property 

that may be caused directly or indirectly by use of this product.

Claims and Returns

Inspect all shipments upon receipt. Missing cartons or obvious damage to cartons should be noted on 

the delivery receipt before signing. Concealed loss or damage should be reported at once to the carrier 

and an inspection requested. All claims for shortage or damage must be made within ten (10) days 

after receipt of shipment. Claims for lost shipments must be made within thirty (30) days of receipt of 

invoice or other notification of shipment. Please save damaged or pilfered cartons until claim is settled. 

In some instances, photographic documentation may be required. Some items are time-sensitive; WPI 

assumes no extended warranty or any liability for use beyond the date specified on the container

Do not return any goods to us without obtaining prior approval and instructions from our Returns 

Department. Goods returned (unauthorized) by collect freight may be refused. Goods accepted for 

restocking will be exchanged or credited to your WPI account. Goods returned which were ordered 

by customers in error are subject to a 25% restocking charge. Equipment which was built as a special 

order cannot be returned.

Repairs

Contact our Customer Service Department for assistance in the repair of apparatus. Do not return 

goods until instructions have been received. Returned items must be securely packed to prevent fur-

ther damage in transit. The Customer is responsible for paying shipping expenses, including adequate 

insurance on all items returned for repairs. Identification of the item(s) by model number, name, as well 

as complete description of the difficulties experienced should be written on the repair purchase order 

and on a tag attached to the item.

Summary of Contents for ATC2000

























Reviews: