Scaler WallPlate HDBaseT Transmitter
4
3. Installation Instructions
3.1 Basic Installation
1.
Turn off power and disconnection the audio/video equipment by following the
manufacturer’s instructions.
2.
Connect shielded Category 5E or greater twisted pair cable with the TIA/EIA-568B
crimp pattern between the transmitter (HDBaseT Transmitter) and the HDBaseT
receiver.
3.
If the HDBaseT receiver cannot provide power to the HDBaseT Transmitter,
connect the included power supply to the 12V DC power input of the device.
4.
Connect an HDMI cable between the display and the HDBaseT receiver per the
manufacturer’s instructions.
5.
Power on attached audio/video devices.
6.
Apply power to the HDBaseT receiver.
7.
If the HDBaseT receiver cannot provide power to the HDBaseT Transmitter,
connect the power supply going to the HDBaseT Transmitter to an AC outlet.
8.
Connect HDMI or DisplayPort/Audio sources. The analog audio input is only
paired with the DisplayPort input. To switch between analog and embedded audio
on the DisplayPort input, please see
5.1.6 DisplayPort Audio
.
HDBaseT Cabling Requirements
For all HDBaseT Cabling, the EIA/TIA-568B crimp pattern must be used on
Category 6 or greater cable. In areas with large amounts of electromagnetic (EM) or
radio frequency (RF) interference, a shielded variety of Category 5e or greater cable
is recommended with shielded connectors on both ends of the selected cable.
Summary of Contents for TPHD462
Page 10: ...Scaler WallPlate HDBaseT Transmitter 5...
Page 30: ......
