Battery details
5
Battery details
Battery requirements
Wrex the Dawg requires 4 x “C” size batteries and 2 x “AA” size batteries (not
included). The remote controller requires 3 x “AAA” size batteries (not included).
Installing or changing the batteries in Wrex the Dawg
To change the batteries in Wrex the Dawg, first carefully lay him on his back. Do not
balance him or place him near a table edge. Install the batteries as follows:
1. Open the battery
compartment on the
underside of Wrex the Dawg
using a Phillips screwdriver
(not included) to remove
the screws on the battery
compartment cover.
2. Insert the batteries
according to the diagram.
Ensure that the positive
and negative polarities
match the illustrations
inside the battery
compartment.
3. Replace the battery
compartment cover and
replace the screws using
the screwdriver. Do not
over-tighten.
NOTE:
You will know when Wrex the Dawg’s batteries are nearly depleted when he
moves very slowly, or becomes less responsive to user interaction and/or commands
from the remote controller.
Underside of Wrex the Dawg
