Malfunction feature /
Breakdown feature / Reset codes
13
Malfunction feature
Being a cross-wired junkyard dog made of scrap pieces, Wrex the Dawg will
sometimes “malfunction” -- you will have to help him by entering a reset code using
the buttons in his reprogramming hatch!
You will know when he is
beginning to “malfunction”
because he will perform a
“malfunction” animation. He will
then intermittently twitch and
squeak when he walks and make
comments to tell you that he is
not behaving normally. He will
continue to respond to remote
controller commands.
Breakdown feature
If you do not reset him while he is “malfunctioning” Wrex the Dawg will eventually
“breakdown”, and will not be able to do anything until you enter a reset code.
NOTE:
If you want to make him “malfunction” enter the code
4444
using the buttons
in his reprogramming hatch. If you want to make him “breakdown” enter the code
4321
. You can then enter any reset code. To return Wrex the Dawg to his normal
behavior, enter
1234
.
NOTE:
Wrex the Dawg might enter Sleep Mode during which you cannot enter a reset
code. To wake him up, press the
Start
button on his back or turn him off and then on
again.
Reset codes
Wrex the Dawg responds to a number of different reset codes:
• Animation Codes (he will perform an animation but will not be reset)
• Mode Codes (he will be reset and then enter a strange mode)
• Malfunction Codes (he will “malfunction”)
• Repair codes (he will return to his normal character)
You can enter any reset code at any time, except when Wrex the Dawg is in Guard
Mode or Off the Leash Mode.
Table 2 outlines some of the reset codes and their descriptions.
