wowvision proVEOS, User Manual, Page: 129 / 153

proVEOS User Manual Page 128
Gateway Management
Projectors are regarded as devices in the web admin. You can change the
following settings for the connected projector:

Projector model, to cater to the different commands and features
supported by each model

Automatic power on and off times to configure proVEOS to turn on and
off the projector at specific times every day
Note:

proVEOS
caters for “device groups” but comes licensed for only one
device/projector, since it is a standalone product. Contact us to find out
more about our wowVEOS product, which supports multiple device groups
and projectors.
Editing Gateway Settings
Click the
Edit Gateway
button in the toolbar. A list of projectors is shown.
Click the
Edit
link beside the projector shown in the list and the following form
appears:

Gateway ID: Provide a unique ID for the proVEOS gateway. Special
characters like underscores “_” cannot be used.

Group Name: Choose the group under which you want to add the
gateway

Device Name/Model: Choose the name of the projector being used.
For
all devices
checkbox will set this for all projectors available.

Gateway Name: Enter an appropriate name for the projector indicating
the location. For example,
Conference Room
.

Gateway IP: Specify an IP address for the proVEOS gateway

Start Time: The time that the projector is turned on daily. The
Set
Time for all device
checkbox sets the provided start and end
times for all projectors available.

End Time: The time that the projector is turned off daily
Click the
Update
button to save the projector settings.