3
SHADING SYSTEMS WITH BACK PULL SYSTEM
08/2019
©
WOUNDWO
These instructions for use are valid for the XLINE conservatory awning, the PERGO-LINE pergola awning, the FREELINE free-standing pergola awning
and the XLIGHT underglass awning.
WO
UND
WO
back pull systems are primarily designed to protect against solar radiation. They can also be used as rain protection to a limited
extent (see 7.1. for details). Any other use or use that extends beyond this shall be deemed improper. The manufacturer assumes no liability for
any resultant damages.
No changes, additions or conversions may be made to the shading systems without the manufacturer‘s consent. System components in an
imperfect condition must be replaced immediately. Only genuine spare parts specified by the manufacturer may be used. In the case of parts
sourced from third parties, there is no guarantee that these have been designed in line with safety and loading requirements.
If the shading systems suffer additional loading as a result of suspended or attached objects, this can lead to the awnings malfunctioning and
becoming damaged. Such actions are therefore impermissible.
Assembly and maintenance work may only be performed by qualified staff.
The connection must be fused and de-energised whilst inspecting or maintaining electrical parts.
WO&WO Sonnenlichtdesign GmbH & Co KG assumes no liability for damages caused by improper use.
WO
UND
WO
shading systems with back pull system are designed and manufactured in line with the provisions set forth in the EN
13561 standard. Nonetheless, dangers can arise for the people involved and/or the product or other property can be damaged during
system operation if the corresponding instructions are not observed
.The product may only be operated as intended, in a technically perfect condition, in a safety- and risk-conscious manner and in
accordance with these instructions for use. Faults that could compromise safety are to be rectified immediately.
It is important to follow these instructions for people‘s safety. These instructions must be kept.
5. INTENDED USE
4 SAFETY
3. VALIDITY
