Worx WX853, Manual

Page: 8 / 32

8
EN
BOOST
reverse correct
BOOST reverse correct
BOOST
reverse correct
Beep,Beep
BOOST reverse correct
BOOST
reverse correct
BOOST reverse correct
The green light flashes : indicates that the battery voltage is too
low, press the BOOST button, wait for the green light to stay on, and
complete the startup within 30 seconds.
Both the red light and the green light are off, and there
is no beep:
indicates that the battery may be completely
damaged. Make sure that the positive and negative poles
are connected correctly, and then press the BOOST button.
After the green light stays on, complete the startup within 30
seconds .
4. Turn the ignition switch to the START position.
5. After the vehicle starts, remove the battery clip.
Charge mobile phones/tablets and other
electronic
products
1. Connect the USB plug of the adapter cable to the USB
output port of the host
2. Connect the charging connector to electronic products
such as mobile phones / tablets
3. Touch the switch button, automatically identify the
appropriate parameters of electronic products, and start
charging electronic products such as mobile phones /
tablets.
BOOST
reverse correct
BOOST reverse correct
BOOST
reverse correct
Beep,Beep
BOOST reverse correct
BOOST reverse correct
BOOST reverse correct
Supply electricity to 12V electronic products / vehicle
mounted products
1. Insert one end of the adapter into the 12V outlet of the host
2. Connect 12V electronic products / vehicle to the other end
of the optional adapter cable
3. Touch the switch button to start the power supply for
vehicle mounted products
Different mode switching of LED lamp
Press the switch button for 3 seconds to start the LED lighting
function. Then shortly press the switch button in sequence:
strong light, flashing, SOS, off.
WARNING:
1. Read the instructions carefully before using the product.
2. It is forbidden to use alternative car batteries.
3. Do not use it as a toy.
4. In order to reduce the risk of injury, close supervision must
be carried out when using this product near children.
5. The product is used for 12V vehicle starting, and it may be
dangerous if it is used for starting other equipment.
6. Please use the battery clip delivered with the machine.
When the battery clip or wire is damaged, please stop using
it to avoid fire, electric shock and other personal injuries.
7. Do not connect the positive and negative poles of the
battery clip.