Worx WX853, Manual

Page: 7 / 32

7
EN
2. Insert the USB-C connector into the EPOWER host.
Start a 12V vehicle
1. Insert the blue connector of battery clip into the host. Make
sure the battery clip indicator is off.
2. Connect the battery clip to the positive and negative poles
of the automobile battery correctly. Connect the red clip
to the battery positive (+), and connect the black clip to the
negative (-);
3. Then, follow the instructions of the battery clip indicator
below to perform corresponding operations:
BOOST reverse correct
BOOST reverse
correct
BOOST
reverse correct
Beep,Beep
BOOST
reverse correct
BOOST
reverse correct
BOOST
reverse correct
BOOST reverse correct
BOOST
reverse correct
BOOST reverse correct
Beep,Beep
BOOST
reverse correct
BOOST reverse correct
BOOST
reverse correct
The green light is on for a long time: indicates that the
connection is correct and powered on, and emergency start
can be made.
The red light is on with a beep sound: indicates that the
positive and negative poles are connected incorrectly. Please
reconnect correctly, and make an emergency start
after the green light is on for a long time
.