background image

3

2

Electric Lawn Mower 

WG717E

PRODUCT SAFETY

GENERAL SAFETY 

WARNINGS

WARNING!

 

Read all safety 

warnings and all instructions. 

Failure to follow the warnings and instructions 
may result in electric shock, fire and/or serious 
injury.

Save all warnings and instructions for 

future reference.

-  

This appliance is not intended for use by 
persons (including children) with reduced 
physical, sensory or mental capabilities, 
or lack of experience and knowledge, 
unless they have been given supervision 
or instruction concerning use of the 
appliance by a person responsible for 
their safety. 

-  

Children should be supervised to ensure 
that they do not play with the appliance.

 

If the supply cord is damaged, it must be 
replaced by the manufacturer, its service 
agent or similarly qualified persons in 
order to avoid a hazard.

IMPORTANT

READ CAREFULLY BEFORE USE 

KEEP FOR FUTURE REFERENCE

Safe operating practices for electrically 

powered lawnmowers

TRAINING

a)   Read the instructions carefully. Be familiar 

with the controls and the proper use of the 

machine.

b)   Never allow children or people unfamiliar 

with these instructions to use the 

lawnmower. Local regulations can restrict 

the age of the operator.

c)    Never operate the machine while people, 

especially children, or pets are nearby.

d)   Keep in mind that the operator or user 

is responsible for accidents or hazards 

occurring to other people or their property.

PREPARATION

1)  While operate the machine, always wear 

substantial footwear and long trousers. Do 

not operate the equipment when barefoot 

or wearing open sandals. Avoid wearing 

clothing that is loose fitting or that has 

hanging cords or ties.

b)  Thoroughly inspect the area where the 

equipment is to be used and remove 

all objects which can be thrown by the 

machine.

c)  Before using, always visually inspect to 

see that the blade, blade bolt and the 

blade assembly are not worn or damaged. 

Replace worn or damaged blades and 

bolts in sets to preserve balance. Replace 

damaged and unreadable labels.

d)   Before use check the supply and extension 

cord for signs of damage or aging. If 

the cord becomes damaged during the 

use, disconnect the cord from the supply 

immediately. DO NOT TOUCH THE CORD 

BEFORE DISCONNECTING THE SUPPLY. 

Do not use the machine if the cord is 

damaged or worn.

OPERATION

a)  Operate the machine only in daylight or in 

good artificial light.

b)  Avoid operating the machine in wet grass.

c)  Always be sure of your footing on slopes.

d)  Walk, never run.

e)  Mow across the face of slopes, never up 

and down.

f)  Exercise extreme caution when changing 

direction on slopes.

g)  Do not mow excessively steep slopes.

h)  Use extreme caution when reversing or 

pulling the lawnmower towards you.

i)  Stop the blade(s) if the lawnmower has to 

be tilted for transportation when crossing 

surfaces other than grass, and when 

transporting the lawnmower to and from 

the area to be mowed.

j)  Never operate the lawnmower with 

defective guards, or without safety 

devices, for example deflectors and/or 

grass catchers, in place.

k)  Switch on the motor carefully according to 

instructions and with feet well away from 

the blade(s).

l)  Do not tilt the lawnmower when switching 

on the motor, except if the lawnmower 

has to be tilted for starting. In this case, do 

not tilt it more than absolutely necessary 

and lift only the part which is away from 

the operator.

Summary of Contents for WG717E

















Reviews: