7
6
Electric Lawn Mower
WG717E
6
7
8
A1
A2
A3
A4
A5
a
INTENDED USE
This product is intended for domestic lawn mowing.
ASSEMBLY
IMPORTANT!
Before you assemble the
lawn mower, check the accessories according
above information, make sure the accessories are
completed.
1. FITTING THE HANDLE (See Fig. A1- A5)
1) Remove the screws (X 2)(a) on the both side of
deck. (See Fig. A1)
2) Insert the Lower Handle (8) into the holes on the
deck provided.( See Fig. A2)
3) Secure with the screws provided.( See Fig. A2)
4) Attach the Upper Handle (6) with the bolts and Lock
Cam Lever (7) to the Lower Handle. (See Fig. A3)
5) Tightening the two Lock Cam Levers. Check that
the handle is FULLY secured.
The cam lever pressure can be adjusted by
adjusting the Lock Cam Lever clockwise/counter-
clockwise. DO NOT OVER TIGHTEN.( See Fig. A4)
NOTE:
Ensure the bolts are fully inserted through the
handles before fitting the handle knobs.
6) Attach the Cable Clips (2) provided, to the upper
and lower handle. Insert the cable into the clips
ensuring there is enough cable slack. (See Fig. A5)
