Worx WG115E Safety And Operating Manual Download Page 14

14

Electric Grass Trimmer

WG115E

PLUG REPLACEMENT 

(ONLY FOR REWIRABLE 

PLUG OF UK & IRELAND)

If you need to replace the fitted plug then 
follow the instructions below.

IMPORTANT

The wires in the mains lead are colored in 
accordance with the following code:

Blue = Neutral

Brown = Live

As the colors of the wires in the electrical cord 
of this appliance may not correspond with the 
colored markings identifying the terminals 
in your plug, proceed as follows. The wire 
which is colored blue must be connected to 
the terminal which is marked with N. The wire 
which is colored brown must be connected to 
the terminal which is marked with L.

WARNING: 

Never connect live or 

neutral wires to the earth terminal of the 

plug. Only fit an approved 13ABS1363/A plug 

and the correct rated fuse.

NOTE: 

If a moulded plug is fitted and has to 

be removed take great care in disposing of the 

plug and severed cable, it must be destroyed 
to prevent engaging into a socket.

Connect

Blue to N

(neutral)

Outer sleeve

firmly clamped

Cable grip

Brown L (live)

13 Amp fuse approved
to BS1362

DECLARATION OF 

CONFORMITYY

We, 

Positec Power Tools (Europe) Ltd,

PO Box 6242, Newbury, RG14 9LT, UK

Declare that the product

Description  

Electric Grass Trimmer

Type  

WG115E (1-designation of 

machinery, representative of Lawn 

Trimmer)

Function  

Cutting grass and similar soft 

vegetation and for trimming grass edges

Complies with the following Directives,

2006/42/EC, 2014/30/EU, 2011/65/EU, 

2000/14/EC amended by 2005/88/EC

2000/14/EC amended by 2005/88/EC:

- Conformity assessment procedure as per  

Annex VI.

- Measured Sound Power Level 

94.8dB(A) 

- Declared Guaranteed Sound Power Level  

96dB(A)

The notified body involved

Name: Intertek Testing & Certification Ltd 

(notified body 0359)

Address: Davy Avenue, Knowlhill, Milton 

Keynes, MK5 8NL

Standards conform to,

EN 60335-1

EN 50636-2-91

EN 62233

EN ISO 3744

EN 55014-1

EN 55014-2

EN 61000-3-2

EN 61000-3-3

The person authorized to compile the technical 

file,

Name Russell Nicholson

Address Positec Power Tools (Europe) Ltd, 

PO Box 6242, Newbury, RG14 9LT, UK 

Suzhou 2016/05/31

Allen Ding
Deputy Chief Engineer, Testing & Certification 

Summary of Contents for WG115E

















Reviews: