12
Electric Grass Trimmer
WG115E
TO MANUALLY WIND LINE (See Fig. H, I, J, K)
IMPORTANT!
Your trimmer is designed to use only
line with a maximum diameter of 1.65mm. Take
approximately 5m of line and insert 15mm of line into
one of the holes in the upper section of the Spool (12)
(See Fig. H). Wind the line in the direction of the arrows
on the top of the spool (See Fig. I, J).
Leave approximately 100mm of line unwound and
place it into the cleat. Repeat on the lower section of
the Spool.
Care should be taken to ensure that the line is neatly
coiled on the spool (See Fig. K). Failure to do so will
impair the efficiency of the automatic line feed.
MAINTENANCE
Remove the plug from the socket before carrying
out any adjustment, servicing or maintenance.
There are no user serviceable parts in your lawn
trimmer. Never use water or chemical cleaners to clean
your lawn trimmer. Wipe clean with a dry cloth. Always
store your lawn trimmer in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free of
dust. If you see some sparks flashing in the ventilation
slots, this is normal and will not damage your lawn
trimmer.
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Clean the moulded plastic housing of the machine
using a soft brush and clean cloth. Do not use water,
solvents or polishes. Remove all debris, especially from
the motor cooling vents.
Store in a secure, dry place out of the reach of children.
Do not place other objects on the product.
G3
H
I
RIGHT
WRONG
J
K