11
Electric Grass Trimmer
WG115E
WG115E
REMOVING THE CAP (See Fig. G1)
Press and hold in the two Cap Release Latches (11).
Pull the Cutting Head Cover (10) off of the Cutting
Head (14). Keep the Cutting Head Cover, Spool (12),
and inside of the Cutting Head clean from debris. To
replace the cap, align the Cap Release Latches and
press it firmly back onto the Cutting Head. Ensure that
it is correctly connected by trying to remove it without
depressing the two latches.
CHANGING THE LINE SPOOL
(See Fig. G2, G3)
First take off the Cutting Head Cover (10) and remove
the old Spool (12). Place the new Spool into the Cutting
Head (14). Feed one line through the eyelet, and then
repeat for the second line. Reattach the Cutting Head
Cover.
WARNING! Your Trimmer is designed to
only use line with a maximum diameter of
1.65mm. Only use nylon line.
IMPORTANT - Always wind the line onto the
upper section of the spool first.
G3
H
I
1
2
10
11
12
14
13
E
F
G1
G2