Worx Landroid WR101SI Instruction Manual Download Page 20

Lawn Mowing Robot 

EN

20

Landroid

®

 is not operating at the 

correct time.

The clock is not set to the correct 
time. 

Set the clock to the correct time.

Programmed cutting times for 
Landroid

®

 are not correct.

Change the time settings for the mower to 
start and stop.

Landroid

®

 cannot correctly dock 

with the Charging Base

Environmental influences

Restart Landroid

®

.

Poor connection caused by debris on 
the Charging Strip.

Clean the Contact Pins located on the 
Charging Base and the Charging Strip on 
Landroid

®

 using a cloth.

The Green light on the Charging 
Base turns ON before charging 
is complete.

The charging base is overheating, the 
battery indication light flashes red.

Place the charging base in a shady area or 
wait until the temperature has cooled down.

Landroid

®

 runs outside the 

boundary wire. Landroid

®

 does 

not mow an area within a 
boundary wire zone. Landroid

®

 

reverses or rotates erratically 
near the  boundary wire.

The boundary wire of another 
Landroid

®

 or another branded robotic 

mower is positioned too closely.

Ensure your Landroid

®

 Boundary Wire 

has at least 0.5m of spacing between the 
neighboring boundary wire.

The boundary wire has been installed 
with tight corners.

Check the boundary wire to ensure the 
corners are smooth. 

In wet conditions, the boundary wire 
electric signal may leak were wire has 
been joined or repaired.

Check boundary wire joints. Insulate to 
provide a fully waterproof connection.

There is boundary wire electric signal 
leakage due to broken insulation.

Repair damaged boundary wire insulation 
with connectors.

The cutting area is larger than the 
allowable cutting area for Landroid

®

.

Contact service agent.

Landroid

®

 wheels skid or 

damage lawn.

Foreign obstacles, such as twigs 
and branches may be lodged under 
Landroid

®

.

Remove foreign objects from underside of 
Landroid

®

The lawn is too wet.

Wait until lawn has dried.

Landroid

®

 exits the boundary 

wire due to high speed when 
going down a hill.

The Boundary Wire is placed on a 
slope steeper than 17% (10°).

Reposition the Boundary Wire away from 
slopes that are steeper than 17% (10°). 
Please refer installation manual for details. 

Environmental Protection

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. 
Check with your Local Authority or retailer for recycling advice.

Summary of Contents for Landroid WR101SI





















Reviews: