Worx Nitro WX020, Safety And Operating Manual

Page: 11 / 16

11
20V Cordless Brushless
Paint Sprayer
WX020
WX020.X
2. COMPONENT LIST
1. SPRAY WIDTH LEVER
2. AIR CAP
3. LIQUID CONTAINER
4. TRIGGER
5. VOLUME KNOB
6. LOCK ON/OFF DIAL
7. AIR FLOW CONTROL
8. BATTERY PACK*
9. FILLING CUP
10. WIRE BRUSH
11.
DECLOGGING NEEDLE
12.
NOZZLE*
13.
GARDEN HOSE ADAPTER
14.
AIR CAP EAR(SEE FIG. C1)
*Not all the accessories illustrated or described are
included in standard delivery.
3. TECHNICAL DATA
Type Designation WX020 WX020.X
(020-designation of machinery, representative of
battery operated Paint Sprayer)
WX020 WX020.X**
Rated voltage 20 V Max ***
Maximum pressure 20 KPa
Color viscosity 300 Din-s
Spray color volume
KQMRQQRS^^PI
Volume of the con-
tainer
1000 ml
Machine weight
(bare tool)
0.98 kg
** X=1-999, A-Z, M1-M9 there are only used for
different customers, there are no safe relevant
changes between these models.
*** Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
SUGGESTED BATTERIES AND
CHARGERS
Category Type Capacity
20V Battery WA3014 4.0 Ah
20V Charger WA3880 2.0 A
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.
4. NOISE INFORMATION
A weighted sound pressure L
pA
: 74,6 dB(A)
A weighted sound power L
wA
: 85,6 dB(A)
K
pA
& K
wA
3 dB(A)
Wear ear protection.
5. VIBRATION INFORMATION
Vibration emission value: a
h
!QW
2
9RGIVXEMRX]/!QWs
The declared vibration total value and the declared
noise emission value have been measured in
accordance with a standard test method and may
be used for comparing one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a
preliminary assessment of exposure.
WARNING: The vibration and noise emissions
during actual use of the power tool can differ
from the declared value depending on the ways
in which the tool is used especially what kind of
workpiece is processed dependant on the following
examples and other variations on how the tool is
used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well
maintained.
The use of the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration and noise accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration syndrome