Worx Nitro WG572, Manual

Page: 12 / 28

12
Cordless Backpack Blower EN
dispose of the pile.
Caution!
- Do not blow hard objects such as nails, bolts, or
rocks.
- Do not operate the blower near bystanders or
pets.
- Use extra care when cleaning debris from stairs
or other tight areas.
- Wear safety goggles or other suitable eye
protection, long pants, and shoes.
BATTERY STATUS (See Fig. F)
Light ON/ Flash Status
One Red on
Two LED-
lights off
Defective Battery
NOTE: If a battery is
plugged in but no light
turns on, press the bat-
tery indicator button on
the basecamp. If a red
light is on at this time, the
battery is defective and
needs to replaced with a
new one.
One Red flash
Two LED-
lights off
----------
Battery Temperature
Protection
The temperature of
battery pack is less than
32
0
F (0
0
C) or more than
113
0
F (45
0
C).
Three Green
on
Fully Charged
NOTE: Press the battery
indicator button on the
basecamp, the light will
be three green on to
indicate a fully charging.
Three Green
flash
---------- Charging
6. MAINTENANCE
CLEANING THE TOOL
Clean the tool regularly.
WARNING! Keep your product dry. Under no
circumstances spray with water.
- To clean the tool, use only mild soap and a damp
cloth.
- Do not use any type of detergent, cleaner or solvent
which may contain chemicals that could seriously
damage the plastic.
- Self lubricating bearings are used in your product,
therefore lubrication is not required.
7. STORAGE (SEE FIG. L)
Stop the blower, and always remove the battery.
Clean the exterior of the machine thoroughly using
a soft brush and cloth. Do not use water, solvents
or polishes. Remove all grass and debris, especially
from the ventilation slots.
Store the machine in a dry place. Do not place other
objects on top of the machine.
FOR BATTERY TOOLS
The ambient temperature range for the use and
storage of tool and battery is 0
℃
-45
℃
(32
℉
-113
℉
).
The recommended ambient temperature range for
the charging system during charging is 0
℃
-40
℃
(32
℉
-104
℉
).