Laser Options
Double Decode
Double Decode
ON
OFF
1
•
Double Decode
is there to minimize the possibility of misreads when scanning very poor quality bar codes.
This option forces the RF Terminal to keep reading until it gets two results that are identical. This "double scan
checking" takes longer but will minimize misreads since it must get the same result twice before considering it
a "good" read.
4.5 Second Laser Beam
4.5 Second Laser Beam
ON
OFF
2
•
4.5-second laser beam
increases the amount of time the laser beam is activated, giving the laser more time to
try and read a code. This option is useful for trying to read poor quality code. The default beam time is 2
seconds.
Aiming Dot Duration
Aiming Dot Duration (in 1/10 seconds)
00 – 99
3
•
This parameter applies to the built-in internal laser. Before the laser beam spreads, you can create a
brighter aiming dot to be sure you are on the bar code you want to read. The default is set to 00, no
aiming dot. You can key in 01 through 99 which creates an aiming dot in 1/10th second increments; i.e.,
20 would be two seconds.
LCD Options
Background Color
Background Color
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F
2
The default background color can be set to one of 16 different values. Each time you press the “
2
” key a small
rectangle will show the selected background color with the current text color. The default value is
1
for
Black.
You
can find more information about colors in chapter X.
Text Color
Text Color
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, F
3
The default text color can be set to one of 16 different values. Each time you press the “
3
” key a small rectangle
will show the selected text color with the current background color. The default value is
2
for
Blue.
You can find
more information about colors in chapter X.
Brightness
Brightness
LOW, MED, HIGH
The default brightness of the LCD is medium which works well for indoor use. In high ambient light areas,
like outdoors, you may want to increase the brightness of the display. Increasing brightness shortens battery
life.
30
