Worldwel Longrun 25CA, Operation Manual

Page: 34 / 65

8) Traveling switch (TS)
The bogie is traveling and stopping without welding.
9) Travel connection cable (TCC)
Connect the control device with traveling bogie.
10) Travel speed control (TSC)
Control the distance's navigating velocity.
11) Speed meter (SM)
Command the distance's navigating velocity.
12) Front wire inching push button (FWIPB)
The preceding wire does feeding or retracting according to the
arrow direction.
13) Power lamp (PL)
The voltage of the control device comes out authorized.
14) Rear wire inching push button (RWIPB)
The backing wire does feeding or retracting according to the arrow
direction.
15) Tandem relay box connection connector (TRBCC)
There is an intermediation box for connecting the control device
and the preceding/backing welding power supply.
16) Front welding current control volume (FWCCV)
Adjust the preceding welding current.
17) Front welding voltage control volume (FWVCV)
Adjust the preceding welding voltage.
18) Rear welding current control volume (RWCCV)
Adjust the backing welding current.
19) Rear welding voltage control volume (RWVCV)
Adjust the backing welding voltage.
20) Front welding voltage meter (FWVM)
Command the preceding welding voltage.
21) Front welding current meter (FWCM)
Command the preceding welding current.
22) Rear welding voltage meter (RWVM)
Command the backing welding voltage.
23) Rear welding current meter (RWCM)