15
2.8.2 Overall Length: 67.3in
(
171.0cm
)
2.8.3 Overall Height: 42.9in (109.0cm)
2.8.4 Tread:
Drive Wheel Tread: 23in
(
58.6cm
)
Caster Wheel Tread: 20.6in
(
52.3cm
)
2.8.5 Wheelbase:
31.9in
(
81cm
)
2.8.6 Curb Weight: 338lbs
(
154Kg
)
2.9 Torque Requirements
Cutter Housing Spindle Nut: 66± 13ft-lb (90±18N-m)
Engine Deck/Front Frame Mounting Bolts: 40-52ft-lb (55-70 N-m)
3. ASSEMBLY INSTRUCTIONS
3.1 Open Crate
Open crate. Remove the loose parts (i.e., operator’s manual, etc) from crate. Remove unit from crate; check there are no
loose parts left.
3.2 Initial Instructions
Attach the handle with four M10×25 Flange Hd. Bolts and four M10 locknuts on each side as shown in FIG 4.
Insert rod end connector threaded stud of left and right steering linkage rod assemblies through hole of left and right
brake swing arms; add M6 nut and washer 8 and tighten. Next, insert rod end connector threaded stud of shift control
rod assembly through hole of shift control arm; add M6 nut and washer 6 and tighten. To finish, insert rod end
connector threaded stud of blade control rod assembly through hole of tension swing arm; add M6 nut and washer 6
and tighten. See FIG 4
The Throttle Cable must be attached to the engine according to the Engine Operator's Manual. The Fuel Tank Line
connects to the line of the engine. (The positions of Fuel Filter and Throttle Cable Attachment are a bit different on
different models of Engines.) See FIG 5