Step 8
Page 9
Using a second person to assist you, carefully turn the assembly from Step 7 upright. Install Cam Locks (H-1)
into the corresponding holes on Left Side Frame (D-1) and Right Side Frame (D-2) as shown. Next, lower Top
Frame (A) down onto the assembly, making sure that Cam Screws (H-2) installed on Top Frame (A) fit up
inside of Left Side Frame (D-1) and Right Side Frame (D-2). Tighten all Cam Locks (H-1) using Allen Key (T-1)
until they are snug.
(T-1) Allen key
(H-1) Cam Lock x 6
x6
Front
H-1
T-1
A
