Assembly Steps
Page 5
(T-2) Phillips Screwdriver
(H-2) Cam Screw x 18
D2
A
T-2
H-2
D1
G
Step 1
x8
Step 1.1
: Install Cam Screws (H-2) into the pre-drilled holes on Left Side Frame (D-1) and Right Side Frame
(D-2) as shown. Fully tighten using a Phillips screwdriver (T-2) (not included).
Step 1.2
: Place Top Frame (A) and Fixed Shelf (G) upside down onto a padded, non-marring surface. Install
Cam Screws (H-2) into the pre-drilled holes on Top Frame (A) and Fixed Shelf (G) as shown. Fully tighten
using a Phillips screwdriver (T-2) (not included).
T-2
H-2
x10
Step 1.1:
Step 1.2:
