Step 2
Page 6
Step 3
(T-1) Allen key
(H-1) Cam Lock x 2
T-1
C
G
T-1
D-2
G
C
Front
x2
x2
H-1
H-1
Front
Place Fixed Shelf (G) onto a padded, non-marring surface, oriented on its side as shown. Install Cam Locks
(H-1) into the corresponding holes on Divider Frame (C) as shown. Carefully lower Divider Frame (C) down
onto, making sure that the Cam Screws (H-2) installed on Fixed Shelf (G) fit up inside of Divider Frame (C).
Tighten all Cam Locks (H-1) using Allen Key (T-1) until they are snug.
Install Cam Locks (H-1) into the corresponding holes on Fixed Shelf (G) as shown. Position and secure the
Fixed Shelf (G) to Right Side Frame (D-2), making sure that the Cam Screws (H-2) installed on Right Side
Frame (D-2) fit up inside of Fixed Shelf (G) by securing the Cam Lock (H-1) using Allen Key (T-2) until snug.
(T-1) Allen key
(H-1) Cam Lock x 2
