Step 11
Page 11
Step 12
(T-2) Phillips Screwdriver
(H-10) Pan Head Screw x 22
H-10
T-2
x22
E
Front
(H-11) Shelf Pin x 4
H-11
x4
J
Attach Back Panel (E) to the back of the bar assembly as shown. Secure the panel using Pan Head Screws
(H-10). Tighten but do not over-tighten the screws using a Phillips Screwdriver (T-2) (not included).
Insert Shelf Pins (H-11) into the desired hole locations on Right Side Frames (D-2) and Divider Frame (C).
Insert Shelf into position as shown, making sure they rest evenly on each Shelf Pin (H-11).
Front
