background image

 

24 

 

Limited Warranty / Repair 

1.  Warranty period and coverage 

(1)  The warranty period is a year from delivered out of our factory. 

(2)  During warranty period, if the pump breaks down or damages in normal operating condition due 

to manufacturing defect(s), the failure parts are repaired free of charge. 

(3)  We provide no warranty support if the defect or damage is caused by any of the following: 

 

Breakdown or damage after the warranty period. 

 

Breakdown or damage due to improper use or safekeeping. 

 

Breakdown or damage caused by the use of unauthorized parts of service. 

(4)  We cannot be responsible for the break down or damage of the customer-specified pump. 

(5)  Irregularities  or  breakdowns  due  to  chemical  or  hydrodynamic  corrosion  by  liquid  are  not 

covered  under  the  warranty.  The  material  chosen  at  the  time  of  the  contract  is  only  a 

recommendation. We do not guarantee the chemical resistance of the material. 

(6)  If the determination of the cause for the breakdown or damage is questionable, it attributes to the 

negotiation between the customer and us. 

(7)  Travel expenses incurred for non-warranted repair to a remote location are charged. 

(8)  Expenses or other damage incurred as a result of breakdowns during operation are not covered 

under the warranty. 

 

GOOD PROTECTION AND MUST BE CAPITALIZED 

WE ARE NOT RESPONSIBLE OR LIABLE FOR ANY LOSS, INCONVENIENCE OR DAMAGE, 

WHETHER SPECIAL, DIRECT, INCIDENTAL, CONSEQUENTIAL, OR OTHERWISE, AND 

WHETHER KNOWN OR SHOULD HAVE BEEN KNOWN TO US, INCLUDING LOST PROFITS, 

GOODWILL, DAMAGE TO OR REPLACEMENT OF OTHER EQUIPMENT AND PROPERTY AND 

PERSONAL INJURY RESULTING FROM ANY BREACH OF WARRANTY, THE INABILITY TO USE 

THE PRODUCT OR UNDER ANY LEGAL THEORY IN CONTRACT OR TORT. THESE 

WARRANTIES AND REMEDIES ARE YOUR SOLE AND EXCLUSIVE WARRANTIES AND 

REMEDIES IN CONNECTION WITH THE SALE AND USE OF THE PRODUCT. NO OTHER 

WARRANTIES, ORAL OR WRITTEN, EXPRESS OR IMPLIED, ARE GIVEN. OUR LIABILITY IS 

LIMITED TO THE ACTUAL PURCHASE PRICE YOU PAID TO THE RETAIL SELLER OF THE 

DEFECTIVE PRODUCT. 

 

THIS IS MANDATORY:    

Some states do not allow the exclusion or limitation of implied warranties or liability for incidental or 

consequential damages, or do not allow a limitation on how long an implied warranty lasts, so the 

above limitations or exclusions may not apply to you. You are advised to contact applicable state laws 

for a full determination of your rights. This warranty gives you specific legal rights, and you may have 

other rights which vary from state to state. 

 

 

Summary of Contents for Super Mag YD-20A6GV1




























Reviews: