World Chemical Super Mag YD-20A6GV1, Instruction Manual

Page: 12 / 27

11
Parts name /
Material / Structure
YD-250* / 400* / 500*GVF(F)*
No. Parts name Qy
Material
Set condition
YD-GV* YD-GVF*
1 Suction casing 1 GFR PP CFR ETFE
Casing set
2 Discharge casing 1 GFR PP CFR ETFE
3 Separate board 1 GFR PP CFR ETFE
4 Grating board 1 GFR PP CFR ETFE
5 Priming water plug 1 GFR PP CFR ETFE
6 Drain plug 1 GFR PP CFR ETFE
7 Liner ring 1
Alumina c GFR PPS Alumina c CFRETFE
8 Lap joint 2 GFR PP CFR ETFE
9 Flange 2 GFR PP GFR PP (Black)
10 Packing 1 (EPDM / FPM) *1
11 O-ring 1 (EPDM / FPM)
12 O-ring 1 (EPDM / FPM)
13 O-ring 1 (EPDM / FPM)
14 O-ring 2 (EPDM / FPM)
15 Hex. socket head cap screw 4 SUS(M6:for 25* / M8: for 40*, 50*)
16 Hex. socket head cap screw 10 SUS(M6:for 25* / M8: for 40*, 50*)
17 Mouth ring 1 CFR PTFE
Impeller set 18 Impeller 1 GFR PP+PP+Magnet CFR ETFE + Magnet
19 Bearing 1
GFR PPS+Carbon/Ceramic CFR ETFE+Carbon/Ceramic
20 Shaft 1 Alumina ceramic
Rear casing set 21 Rear thrust ring 1 Alumina ceramic
22 Rear casing 1 GFR PP CFR ETFE
23 Rear casing support 1 FC200 Rear casing
support set 24 Stud bolt 3 / 5 SUS(25*GV(F): 3pcs)
25 Outer magnet 1 FCD450-10+Magnet
26 Base 1 GFR PP / FC450-10
27 Base biscuit 1 FC200 (25*GV(F)*/505GV(F)*: No)
28 O-ring 1 (EPDM / FPM)
29 Hex. bolt 3 SUS M8x25
30 Hex. socket head cap screw 6 SUS M6 x 12
31 Hex. socket head cap screw 4 SUS M8
32 Motor with bracket *2 1 FC200 + Alumina alloy
*1: FPM: Dai-el *2: When assembly of the 5HP general motor, the mounting plate is necessary.