World Chemical 5002GWN1-HP, Instruction Manual

Page: 6 / 20

5
◼
Outline dimension
No. Part name Remarks No. Part name Remarks
1 Motor FC 15 Set bolt 92 CFR PP
2 Motor magnet Ferrite 16 Set bolt 52 CFR PP
3 Motor magnet key SS 17 Set bolt nut CFR PP
4 Motor magnet nut SS 18 O-ring for set bolt FPM / EPDM
5 Cab tire cable 2PNCT 19 Floating washer
PTFE (Only Ceramic
bearing)
6 Motor cover CFR PP 20 Standoff bolt HT, PVC
7 Impeller CFR PP 21 Strainer PP
8 Impeller magnet Ferrite 22 Sludge fence PP
9 Front bearing PTFE / Ceramic 23 Bottom plate PP
10 Rear bearing PTFE 24 50A Valve socket PVC
11 Separating board Ceramic
12
O-ring
for separating board
FPM / EPDM
13 Casing CFR PP
14 Pump shaft SiC
*
When the temperature of the liquid is high (131F/ 55C degrees and more), do not use No. 24: Valve socket (PVC). If using a valve socket,
HT-PVC valve socket is recommended.
A-A
Elbow: Thread
Strainer
φ
3