11
◼
Disassembly
1.
Remove 4 set bolts (16) from the standoff bolts (20)
which are affixed to the casing (13).
2.
The bottom board (23) with the standoff bolts (20) and
the strainer (21) are removed.
3.
After removing the rest of the set bolts (15) (16), pull
the casing (13) forward to separate. The impeller (7) is
secured on the motor cover (6) through the separating
board (11).
4.
Remove the O-ring for separating board (12), and
move the impeller (7) attached to the motor side magnet
(2) outward to remove.
⚫
Do not disassemble the motor (including the cable). When maintenance of the motor is required,
contact your distributor.
Set bolt (16)
Casing (13)
Standoff bolt (20)
Strainer (21)
Bottom board (23)
Set bolt (15) (16)
Motor cover (6)
O-ring for separating board (12)
