Workzone WMW 300-2, User Manual

Page: 18 / 51

Cleaning and maintenance
AFTER SALES SUPPORT 18
USA 1 866 326 6446
meister-service@meister-werkzeuge.de
USA
NOTICE!
Risk of short circuit!
Water that has penetrated the housing may cause a short
circuit.
− Never submerge the multifunction tool in water.
− Make sure that no water penetrates the housing.
NOTICE!
Risk of damage!
Improperly cleaning the multifunction tool and the tools may
lead to damage.
− Do not use any aggressive cleaners, brushes with metal or
nylon bristles or sharp or metallic cleaning utensils such as
knives, hard scrapers and the like.
After every use
1. Before cleaning, pull the power plug 5 out of the socket.
2. Let the tool cool off completely.
3. Unlock the extractor line
17 and take it off of the multifunction tool
(see fig. M ).
4. Use a soft brush or compressed air to clean the extractor line, the housing
and the inside thread 18 .
5. Wipe the housing off with a damp cloth if heavily soiled.
6. Attach the extractor line to the multifunction tool again.
After every eight hours of operation
1. Unlock the extractor line 17
and remove it.
2. Use commercially-available universal oil to oil the moving parts of the tool
holder 16 .
3. Attach the extractor line to the multifunction tool again.