AFTER SALES SUPPORT
Preparation
15
USA
1 866 326 6446
USA
Familiarizing yourself with the functional principle
The multifunction tool does not rotate the fitted tool; instead, it oscillates it back
and forth.
Familiarizing yourself with permissible materials
You can use the following tools to process the listed materials:
Plunge-cut saw blade
• Hard and soft woods
Scraper
• Layers of paint and lacquer
• Synthetic coatings
• Flexible floor coverings, e.g. carpets, linoleum
Segment saw blade
• Hard and soft woods
Sanding plate
• Hard and soft wood surfaces
• Layers of paint and lacquer
Preparing the multifunction tool
CAUTION!
Risk associated with oscillating moving parts!
If you accidentally switch the multifunction tool on, you could
injure yourself on the moving parts that are oscillating.
− Before mounting accessories, disconnect the
multifunction tool from the power supply.
Mounting the handle
− Screw the handle
6
onto the multifunction tool (see
fig
.
C
). Make sure that
you screw the handle onto the left side of the multifunction tool if you are
right-handed and onto the right side if you are left-handed.
Connecting the dust extractor
1. Mount the extractor line
17
with the holding clips
2
onto the back of the
multifunction tool (see
fig. B
and
M
). Make sure that the extractor line is
correctly positioned on the multifunction tool.
Summary of Contents for WMW 300-2
Page 4: ...A B 4 USA 1 2 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 18 17 ...
Page 5: ...5 USA M L K J I H G F E D C V z 230 V 50 Hz ...
Page 24: ...AFTER SALES SUPPORT 24 USA 1 866 326 6446 meister service meister werkzeuge de USA ...
Page 48: ...SERVICIO POSVENTA USA 48 USA 1 866 326 6446 meister service meister werkzeuge de ...
