6
WDS-130
www.servotool.eu
0203-5142281
GB
1800-719901
IRL
aFTEr SalES SuPPOrT
4) Power tool use and care
a. Do not force the power tool. Use the correct power tool for your application. The
correct power tool will do the job better and more safely at the rate for which it
was designed.
b. Do not use the power tool if the switch does not turn it on and off. Any power tool
that cannot be controlled with the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source before making any adjustments,
changing accessories, or storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e. Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tools
operation. If damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f. Use the power tool, accessories and tool bits etc., in accordance with these
instructions and in the manner intended for the particular type of power tool,
taking into account the working conditions and the work to be performed.
g. Damaged switches must be replaced at a customer service repair centre. Do not
use power tools that cannot be switched on and off.
h. Do not leave power tools unattended while they are switched on. Always switch
off the tool and wait until it has come to a full standstill before leaving.
i. If the mains cable has been damaged, it must be replaced by a suitably qualified
person with a special mains cable. These can be obtained from the manufacturer
or the manufacturer’s customer service department.
5) Service
a. Please use a qualified expert who uses original replacement parts to repair your
power tool.
b. Caution! The use of any accessories or additional tools other than those
recommended in this manual may lead to an increased risk of injury and may
invalidate your warranty. Only use original replacement parts.
Additional safety instructions.
Contact or inhalation of dust coming free during sanding (e.g. lead painted
•
surfaces, woods and metals), can endanger the health of the operator and
bystanders. Always wear appropriate personal equipment such as a dust mask and
use the dust bag during sanding.
Check that the switch is not in the “ON” position before connecting the machine to
•
the mains voltage.
Always keep the mains lead away from moving parts of the machine.
•
Use safety glasses, especially when sanding above your head.
•
PSM6035 Ma EN-IRL 1112-07.indd 6
08-12-2011 14:14:35
