14
WDS-130
www.servotool.eu
0203-5142281
GB
1800-719901
IRL
aFTEr SalES SuPPOrT
5
FaQ
Trouble shooting
Below we have listed a few probable causes and solutions to which you can refer if
your machine does not function properly.
Fault
1. Machine fails to operate
2. The electric motor fails to reach
maximum speed.
3. Machine overheats.
4. Excessive sparking or electric motor
runs irregular.
5. The abrasive paper is filled with
adhesive/ paint or a similar material
Solution
Power turned off.
•
(Extension) cable damaged.
•
The extension cable is too thin and/or
•
too long.
The mains voltage is lower than 230 V.
•
Air vents are blocked. Clean them with
•
a dry cloth.
The machine has been overloaded.
•
Use the machine for the purpose for
which it was intended.
There’s dirt inside the motor or the
•
carbon brushes are worn.
Replace the carbon brushes or bring
•
the machine to a specialized repair
centre.
Paint or adhesive is not really dry.
•
Some paints stick more to the abrasive
•
paper than others / clean the abrasive
paper at regular intervals
PSM6035 Ma EN-IRL 1112-07.indd 14
08-12-2011 14:14:38