11
WDS-130
www.servotool.eu
0203-5142281
GB
1800-719901
IRL
aFTEr SalES SuPPOrT
Dust collection
Fig. 2
Insert the dust extraction adapter into the dust extraction connection (6).
•
Connect the hose of a vacuum cleaner to the dust extraction adapter.
•
Replacing worn sanding paper
Fig. 2
Before assembly sanding paper always remove the plug from the mains.
1. The sandpaper (4) is fixed by Velcro® fastener to facilitate the replacement.
Simply pull off the sanding paper
•
Press the new one in the centre of the sanding sole (5)
•
Coarse sand-paper (grain 60) removes in general the bigger part of the material and
fine sand-paper (grain 120) is used for the finishing.
Replacing the sanding sole
The sole has to be replaced when the Velcro® has been worn out.
Before replacing the sanding sole disconnect the sander from the mains.
Remove the sandpaper from the sole.
•
Remove the screws which fix the sole to the sander.
•
Remove the sole.
•
Install the new sole on the sander.
•
Replace the screws and tighten fully
•
PSM6035 Ma EN-IRL 1112-07.indd 11
08-12-2011 14:14:37
