background image

                           

3600W Digital Inverter with Pure Sine Wave

AFTER SALES SUPPORT

e-mail: [email protected]

1800 909 909

MODEL: №. INF3800A-1  •  03/2018  •  59905

(toll free)

AFTER SALES SUPPORT

(toll free)

3600W Digital Inverter with Pure Sine Wave

e-mail: [email protected]

1800 909 909

MODEL: №. INF3800A-1  •  03/2018  •  59905

10

11

Risk of injury and property damage when transporting generator

Hazard

What could happen

How to prevent it

Fire, inhalation, damage 

to vehicle surfaces

Fuel or oil can leak or spill and 

could result in fire or breathing 

hazard, serious injury or death 

can result. Fuel or oil leaks can 

damage carpet, paint or other 

surfaces in vehicles or trailers.

The generator is equipped with a fuel drain valve, 

turn the valve to the off position before transporting to 

avoid fuel leaks. Transport fuel only in an approved fuel 

container. Always place generator on a protective mat 

when transporting to protect against damage to vehicle 

from leaks. Remove generator from vehicle immediately 

upon arrival at your destination.

Risk of breathing – inhalation hazard

Hazard

What could happen

How to prevent it

Fuel engines produce 

toxic carbon monoxide 

exhaust fumes.

Breathing exhaust fumes will 

cause serious injury or death.

Operate generator in clean, dry, well ventilated area. 

Never operate unit in enclosed areas such as garages, 

basements, storage, sheds, or in any location occupied 

by humans or animals. Keep children, pets and others 

away from area of operating unit.

Risk of unsafe operation

Hazard

What could happen

How to prevent it

Operation of generator 

in careless manner.

All sources of energy include 

the potential for injury. Unsafe 

operation or maintenance of your 

generator could lead to serious 

injury or death to you or others.

• 

Review and understand all of the operating 

instructions and warnings in this manual.

• 

Become familiar with the operation and controls of 

the generator. Know how to shut it off quickly.

• 

Equip area of operation with a fire extinguisher 

certified to handle fuel fires.

• 

Keep children or others away from the generator at 

all times.

Operating generator 

while suspended

Generator will not operate properly 

and will cause damage to the 

generator and could cause serious 

injury or death to you or others.

Never operate generator while suspended or in an 

unlevel position. Always operate generate on a flat, level 

surface.

Risk of hot surfaces

Hazard

What could happen

How to prevent it

Contact with hot engine and 

generator components.

Contact with hot surfaces, such as 

engines exhaust components, could 

result in serious burns.

During operation, touch only the 

control surfaces of the generator. Keep 

children away from the generator at 

all times. They may not be able to 

recognize the hazards of this product.

Risk of moving parts

Hazard

What could happen

How to prevent it

Contact with moving parts can 

result in serious injury.

The generator contains parts which 

rotate at high speed during operation. 

These parts are covered by guarding to 

prevent injury.

Never operate generator with guarding 

or cover plates removed. Avoid wearing 

loose fitting clothing or jewellery which 

could be caught by moving parts.

Risk from lifting

Hazard

What could happen

How to prevent it

Lifting a very heavy object.

Serious injury can result from 

attempting to lift too heavy an object.

When lifting, always keep the object 

you are lifting near the vertical axis of 

your body. DO NOT use you back to 

lift heavy loads. Both people should 

crouch down, grab the underside 

of unit and use your legs to carry 

the weight. Keep the object as near 

the centre of your body’s gravity as 

possible. Avoid twisting your bodies 

when carrying the unit; instead, turn 

your whole body using your feet.

Summary of Contents for 59905























Reviews: