6
General safety warnings
4. Power tool use and care
a.
Do not force the power tools.
Use the correct power tool for your
application. The correct power tool will do the job better and safer at
the rate for which it was designed.
b.
Do not use the power tool if the switch does not turn it “on” and
“off”.
Any power tool that cannot be controlled with the switch is
dangerous and must be repaired.
c.
Disconnect the plug from the power source and/or the battery
pack from the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive
safety measures reduce the risk of starting the power tool accidentally.
d.
Store idle power tools out of the reach of children and do not
allow persons unfamiliar with the power tool or these instructions
to operate the power tool.
Power tools are dangerous in the hands
of untrained users.
e.
Maintain power tools with care.
Check for misalignment or binding
of moving parts, breakage of parts and any other condition that may
affect the power tool’s operation. If damaged, have the power tool
repaired before use. Many accidents are caused by poorly maintained
power tools.
f.
Keep cutting tools sharp and clean.
Properly maintained cutting
tools with sharp cutting edges are less likely to bind and are easier
to control.
g.
Use the power tool, accessories and tool bits etc. in accordance
with these instructions, taking into account the working
conditions and the work to be performed.
Use of the power tool for
operations different from those intended could result in a hazardous
situation.
h.
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given
supervision or instruction concerning use of the appliance by a person
responsible for their safety.
i) Children should be supervised to ensure that they do not play with
the appliance.
5. Service
a. Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the
power tool is maintained.
Safety Instructions for Air Brush Compressors
This appliance is not intended for use by young or infirm persons unless
supervised by a responsible person to ensure that they can use the
appliance safely. Young children should be supervision to ensure that
they do not play with play with the appliance.
This compressor is rated at 150W S3 20%.
WARNING:
Please ensure that you read, understand and apply all
the SAFETY WARNINGS in this user guide.
WARNING:
Wear protective breathing equipment Paint mist and
solvent vapors are damaging to health. Always wear protective
breathing equipment and only work in well ventilated rooms or
using supplementary ventilating equipment. It is advisable to wear
protective clothing, a safety mask, safety glasses, ear protection
and gloves.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
