2. ADVANCED SETTINGS AND ADMINISTRATOR MODE
selec ng, the box turns black (see Figure 2.20) and then clicking a menu will appear from which you can choose
the desired se ng.
Figure 2.20 – Selec ng the box for edi ng ROI
Enable Table Logging
– Enable/disable saving a record of the table with the defini on of measured areas.
•
Maximum
– From all temperature points in the ROI is searched maximum temperature in the area.
•
Minimum
– From all temperature points in the ROI is searched minimum temperature in the area.
•
Average
– From all temperature points in the ROI is calculated average temperature of the area.
•
Std. Devia on
– From all temperature points in the ROI is calculated standard devia on temperature
of the area.
•
Variance
– From all temperature points in the ROI is calculated variance temperature of the area.
•
Range
– Calculates the difference between maximum and minimum temperatures in the area.
•
Median
– From all temperature points in the ROI is calculated median.
•
px temp >
– Number of pixels above set temperature.
•
TTA
– Time in millisecond above set temperature.
Criterion
– The criterion which will be used to evaluate the me course of filtered sta s cs (during one
measured sequence of video frames).
•
Max. Value
– From en re course of sta s cs in me are determined maximum value.
•
Min. Value
– From en re course of sta s cs in me are determined minimum value.
Operator
– Mathema cal operator, through which will be calculated criterion compared with the reference
value.
• You can choose between these operators: >, <, =, >=, <=, <>, meaning: the calculated criterion is
more than, less than, equal, more than or equal, less than or equal and not equal from the reference
value.
•
In Range
- It allows you to set 2
Criterion Value
for 1 ROI. Criterion will be met if value will be between
these 2 Criterion Value.
Criterion Value
– The reference value of criteria of the me course of filtered sta s cs. With this value is
compared, a er each measurement using the operator, criterion course of measured sta s cs.
Outputs 1-5
– Enable/disable the link of the ROI on digital output with index #. If the ROI condi on defined
criteria and operator is met/not met, switches output. It is set by clicking on the corresponding column of
output in desired row ROI.
For more detailed se ngs, you need to click on the ROI number in the first column. Then appears the edi ng
E-mail and Web
[email protected]
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
Libocka 653/51b
Prague, Czech Republic
Revision 2.6 EN, 14
th
Feb, 2019
All pictures are only for illustra on.
Real values may vary.
31
