7. GENERAL USAGE OVERVIEW
7
General usage overview
This chapter should provide the reader basic usage information for understanding SMARTIS functions, the logic
behind it and basic terminology.
7.1 Controlling SMARTIS
The SMARTIS is intended as all‐in‐one solution featuring a thermal camera, control unit, I/O card, as well as a
TPC/IP interface integrated within a single casing including an in‐built web server allowing for communication
with a superior system, including any PLC with this interface.
7.1.1 Web server
After powering the SMARTIS up and connecting it to Ethernet network, the device should be available on default
IP address
10.0.0.225
. This IP address could be changed later.
All the user needs for configuring and controlling the SMARTIS is computer or tablet with at least 10” screen with
web browser. The built in web server should be running few seconds after the SMARTIS boots up.
The web server is available on the standard web port 80.
7.1.2 Login control
The inner logic of SMARTIS does not allow more users to log into the web server simultaneously. This should
prevent unexpected settings changes from administrator or operators.
The current user logged in must be firstly disconnected before another user can use the SMARTIS web server.
This can be done through special web pages described in chapter 8.
7.1.3 Users
There two types of users: administrator and operators.
Administrator
Administrator (or ”Admin”) is a unique user that can not be created nor deleted. Administrator has the highest
privileges, he/she can creates unlimited number of operators.
Administrator should configure the SMARTIS and prepare it for operators to perform measurement sessions.
The default password for administrator ”Admin” is ”1234”.
E‐mail and Web
[email protected]
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
Libocka 653/51b
Prague, Czech Republic
Version 210127 EN, 27
th
Jan, 2021
All pictures are only for illustration.
Real values may vary.
13
