11. OPERATOR MODE
Additional information for Pan‐Tilt (SAFETIS Pan‐Tilt only)
In the SAFETIS Pan‐Tilt version of the firmware, the panel contains additional information about the presets. You
can see the countdown to the next preset. When this time reaches zero, the camera will turn and load new
preset settings previously saved in the Administrator mode. When the camera reaches last active preset, it will
cycle to the first preset afterwards.
Figure 11.4: Information tabs.
Video stream
The thermocamera image is showing video stream of the current measurement.
The video stream has limited framerate and resolution caused by hardware and software limitation.
Figure 11.5: Camera image and status.
Measurement graph
The selected ROI statistic result values are displayed in the graph. The x‐axis represents time. The length of x‐
axis can be set in administrator mode as graph time span. The Y‐axis represents temperature in either degrees
E‐mail and Web
[email protected]
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
U Albrechtova vrchu 12
155 00, Prague 13
Czech Republic
Version 210224 EN, 24
th
Feb, 2021
All pictures are only for illustration.
Real values may vary.
37
