10. ADMINISTRATOR MODE
10.2 Preset (SAFETIS Pan‐Tilt only)
In the SAFETIS Pan‐Tilt version of the firmware, you can select from multiple presets of the measurements.
Each measurement can contain different types and amount of ROIs and different settings for each ROI and
corresponding outputs. The Admin user can also set position of the camera and save it to the positioning system.
During the actual measurement the camera will cycle all Presets positions in order and use each preset settings
for current measurement for the set amount of time. The time the camera will stay in each Preset can be further
changed for each Preset individually.
Figure 10.6: Overview of preset settings.
There are 14 available Presets for the camera. Each preset can be modified individually and activated for the
measurement. Only Presets set as Active will be cycled through during the measurement. To activate the preset
simply click Activate button on this page. To edit the Preset, click Edit button. The Preset will automatically
become active after you finish editing and save the settings.
E‐mail and Web
[email protected]
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
U Albrechtova vrchu 12
155 00, Prague 13
Czech Republic
Version 210224 EN, 24
th
Feb, 2021
All pictures are only for illustration.
Real values may vary.
25
