13. MAIN MENU (SETTINGS)
13.7 Advanced
ADVANCED category allows user to set advanced behavior of the device. It is divided into nine more categories
– THERMAL CAMERA, VISIBLE CAMERA, LAYOUT, IMAGES & VIDEO, ALARMS, COMMUNICATION INTERFACE,
MEMORY, SYSTEM and INFO.
Note
: The Advanced menu cannot be accessed while Video or Image Series capture is underway. The
user will be notified of this and prompted to stop the capture or recording before accessing the Advanced
menu.
Figure 13.8: Advanced settings.
ADVANCED MENU consists of the following categories:
THERMAL CAMERA ‐ Emissivity, Atmospheric temperature, Shutter correction (NUC) period and reset to
Default settings
VISIBLE CAMERA ‐ Gamma, White Balance, Vibration Compensation, Backlight Compensation, Wide Dynamic
Range Mode, Defog, Noise Reduction (2D), Noise Reduction (3D), Color Gain, Exposure Mode, Shutter, Iris,
Gain, Exposure Compensation and reset to Default settings
LAYOUT ‐ Layout mode toggle, Toggle of which datapoints should be displayed in the INSPECTION PANEL
(Maximum, Center, Minimum, Range Mode, Zoom (Visible), Zoom (Thermal), Captured Images, Recorded
Video), Thermal Frame toggle, GPS Info cycling
IMAGES & VIDEO ‐ Toggles for capture file types, Image Save to, Video Radiometric, Video Visible
ALARMS ‐ Alarm Palette, Alarm Above, Alarm Below, Alarm Between, Alarm Opacity
COMMUNICATION INTERFACE ‐ IO Channel function bindings, S.Bus Offset, Trigger binding
MEMORY ‐ Set SSD, Set SD Card, Set Flash Drive, Update, Copy Logs
E‐mail and Web
[email protected]
www.workswell.eu
Mobile:
+420 725 877 063
ID:
Reg. No.: 29048575
VAT No.: CZ29048575
Headquarters
U Albrechtova vrchu 12
155 00, Prague 13
Czech Republic
Revision 210427 EN, 27
th
Apr, 2021
All pictures are only for illustration.
Real values may vary.
43
