Worksaver GLBH-2072, Owner'S/Operator'S Manual

Page: 23 / 32

22
Bale Hand will not
operate. 1. No or insufficient oil flow. Remote hydraulic connection fittings not
compatible. Check for proper fitting.
Hydraulic system may not be supplying
rated pressure. Consult your dealer.
Hydraulic system may not be delivering its
rated volume of oil due to wear. Hydraulic
pump may need to be repaired.
Hydraulic valve on tractor or skid steer not
engaged.
Hydraulic hose
failure. 1. Hydraulic relief pressure setting is
very high and may cause
hydraulic hose failure.
2. Hoses are worn or frayed.
3. Hose rating may be too low for
hydraulic system pressure.
4. Hose is being pinched by move-
ment of loader mount or loader
linkage.
Check hydraulic system and adjust relief
valve.
Replace hose.
Replace with higher rated hoses.
Reroute hose and refasten.
TROUBLE-SHOOTING GUIDE
(continued)
PROBLEM POSSIBLE CAUSE POSSIBLE REMEDY
Hydraulic oil over-
heats. 1. Hydraulic oil level in power unit
may be low.
2. Hydraulic oil or oil filter in power
unit may be dirty.
3. Hydraulic oil reservoir of power
unit may be small.
Check and add oil.
Change oil and filter according to power
unit manufacturer’s recommendations.
Allow time for oil to cool down.
Excessive rear
tractor tire
slippage. 1. Tractor too small.
2. Insufficient traction.
Use larger, heavier tractor.
Add rear tire weights or add ballast in
tire. Use tractor with FWDA.
Install heavy implement on rear 3 pt. for
counterbalance weight.