6
Workrite Ergonomics 800.959.9675 www.workriteergo.com
Workrite Sequoia Monitor Arm - Assembly Instructions
Attach Wing Bar Mounts to Pole
Attach Wing Bars to Wing Bar Mounts
4
5
Place the Right Wing Bar Mount (M) onto the Pole to rest
on the Collar. Place the Left Wing Bar Mount (N) onto the
extension pole to rest on the Right Wing Bar Mount.
Install Ratchet Levers (D) into the rear of both Wing Bar
Mounts and tighten.
a
b
a
b
c
Place 8mm Flat Washers (R) into recesses into the Wing Arm
as shown. Hold in place while attaching Wing Arm to Wing
Arm Mount.
Place Steel Spacer (Q) on M8 × 5mm Arm Bolt (P) and attach
Wing Bars to Wing Bar Mounts. Tighten Securely with 6mm
Hex Wrench (S).
Repeat this step for the remaining Wing Bar.
Hold Flat Washers (R) in
place while attaching.
C
D
D
N
M
R
R
O
M
N
&
a
b
S
Q
P
Left
Right
