4 of 8
Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Needs feet attached
Attach Base to Pre-Drilled Workrite Worksurface
If you do not have a Workrite worksurface skip to Step 4
If you have a Workrite worksurface:
Position leg assemblies to align mounting holes
in brackets to pre-drilled holes in Worksurface
then attach using Pan Head Top Screws (H). If
you use an electric screwdriver, be sure it is on
the lowest torque setting to avoid stripping the
holes in the top.
Tighten all screws connecting brackets to leg
assemblies.
Skip to Step 5.
3
H
H
H
#12 × ¾" Pan Head
Laminate Top Screw
Hardware at actual size
3 screws per
Short Bracket (C)
4 screws per End
Bracket (D&E)
