9
FRONT MICRO LEFT / RIGHT ADJUSTMENT:
Turning this knurled knob away from you will result in the print moving right on the
shirt. Movement towards you will cause the image to move left on the shirt.
MICRO REGISTRATION REQUIREMENTS AND TIPS:
All Micros should be centered on grids before set-up. Rear clamps should be
released when adjusting front micros more then 1/2”.
MICRO Adjustment Procedure:
1. Raise the Table.
2. Look through the screen at the art,
adjust location and clamp front.
3. Micro front as needed.
4. Clamp rear.
5. Re-Micro front as needed.
6. If rear clamp are released, repeat steps 3, 4 and 5.
Summary of Contents for Freedom 6/8
