13
The type 1 shock has a scale engraved on the ring at the end of the shock. This ring butts against the threaded body of the shock
where there is a dimple indicating the setting of the shock.
The shock is very sensitive to change, adjust with caution moving is fractions between the numbers. The lower the number the
stiffer the shock gets.
When the table indexes the shock should be adjusted to bring the table to a stop, bottoming out all the way without shaking. If the
shock is to stiff it will not compress enough on impact causing registration problems the same issues can occur if the shock is set to
soft as well as damage to the press.
Note:
the number indicated in the picture above does NOT reflect what the shock setting is on each press. Always consult a trained
Workhorse products technician before any adjustments are made.
Questions? Give us a call!
800.778.8779
workhorseproducts.com
Visit our website at
Summary of Contents for Freedom 6/8
