EN
PAGE 3
User Manual
/ Manual de uso
FRONT PANEL
2
1
4
5
6
7
8
10
3
9
11
[VOLUME
[MIC INPUT
[POWER
[POWER SWITCH
SIGNAL]
SIGNAL]
]
]
indicator
indicator
indicator
[VOLUME LIMIT]
indicator
Lits when input signal exceeds a
It lits when a signal is connected in the mic input terminals placed in the rear panel.
certain level.
Lits if signal output to the speakers
exceeds the limit value, causing the
limiter to activate, or if the internal
temperature of the device increases
abnormally. If the limiter activates,
turn the
[
VOLUME] knob to the left so
the indicator light goes out.
[VOLUME]
[LEVEL]
[TREBLE]
[BASS]
[INPUT]
[INPUT 1]
knob
knob
knob
knob
selector
Adjusts the master volume output to the speakers. Turning to the right the volume increases.
Adjusts the selected LINE input volume. Turning to the right the level increases.
Adjusts the high frequencies tone in the output. Turning to the right the tone gain increases.
Adjusts the low frequencies tone in the output. Turning to the right increases the tone gain.
It allows to select the LINE input. INPUT 1 in the front side and INPUT 2 & 3 in the rear panel.
This stereo minijack connector corresponds to INPUT 1. It accept LINE level
Turning all the way to the left mutes the sound.
Turning all the way to the left mutes the sound.
Turning all the way to the left reduces it.
Turning all the way to the left reduces it.
When the device detects signal, the corresponding green LED will lit.
Low
-
impedance
connections
High
-
impedance
connections
-17.0dBu or more
-17.0dBu or more
-0.8dBu or more
2.3dBu or more
[
VOLUME SIGNAL
]
[8
Ω
]
[16
Ω
]
[70V]
[100V]
2.
1.
Caution
Turns on when the power is on.
Turn on/off the power.
·
To ensure that high-volume noise is not output from the speakers, power on the connected device
first and then turn on this device. When turning the system off, turn off this device, and then the
connected devices.
·
After turning the power switch off, wait for about five seconds before turning it on again. Rapidly
turning the power switch on and off in succession can cause the unit to malfunction.
·
Even when the switch is in the off position, a small amount of electricity is still flowing to the unit.
If it will not be used for an extended period of time, therefore, be sure to unplug the power cord
from the wall AC outlet.
3.
11.
4.
5.
10.
6.
7.
8.
9.
PA 100 MX
