DIPSWITCHES FUNCTIONALITY
PA 100 MX
incorporates some features that can be configured through dipswitches block. Please, check
the following table and individual specification for each function.
DIPSWITCH
FUNCTION
SW 1
NOT USED
SW 2
NOT USED
SW 3
SW 4
SW 5
SW 6
SW 7
NOT USED
SW 8
MIC PRIORITY STATE
SW 9
STEREO / MONO INPUT
SW 10
70V OR 100V WHEN HIGH IMPEDANCE IS SELECTED
OFF
1st
2nd
3rd
FEEDBACK SUPRESSION
MICROPHONE GAIN SETTING
MIC FEEDBACK
SUPRESSOR
DIP switch body
OFF
+ 6 dB
+ 10 dB
+ 15 dB
MIC GAIN SETTING
DISABLED
ENABLED
MIC INPUT PRIORITY
MONO
STEREO
LOW IMPEDANCE
MODE INPUT
70V
100V
HIGH IMPEDANCE
MODE
MIC feedback supressor incorporates 3
presets and disable state.
The 1st preset corresponds to the most
high antifeedback level
MIC gain setting incorporates 3
levels and disable state.
MIC Priority allows to enable the priority
in the mic input and to mute the audio signal
in the LINE input.
In stereo mode, the left channel signal
is output from SPEAKERS A terminals
and the right channel signal is output
from SPEAKERS B terminals.
Once selected the high impedance mode
with the switch (15), use this dip to select
the output type (70V or 100V).
PAGE 6
User Manual
/ Manual de uso
EN
PA 100 MX
