Drywall Sander
IN
INTENDED USE
The machine is designed for sanding drywalls, ceilings and walls of the inner and outer surfaces, clearing the floor residues,
paint coatings, adhesive and loose plaster etc.
Our machine is not suitable for processing the object containing asbestos.
TECHNICAL SPECIFICATIONS
●
NOISE/VIBRATION INFORMATION
The vibration level given in this information sheet has been measured in accordance with a standardised test given in EN
60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However,if the tool is used for different
applications, with different accessories or insertion tools or is poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when
it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
EXPLANATION OF SYMBOLS
Attention!
Pull out mains plug immediately, if the mains cable
is damaged, entangled or severed. Always remove
the mains plug before working on the device.
Read the manual.
Wear eye protection
Wear gloves
Wear a mask in dusty conditions
Electrical appliances must not be
disposed of with the domestic waste.
Protection class II
PRODUCT ELEMENTS
1
Sanding sheet
2
Allen key
3
Carry bag
4
Speed adjustment knob
5
Switch lock-on button
6
Soft handle
7
Side handle
8
Cable
9
Dust hose
10
Suction power adjusting wheel
11
Main switch
12
LED switch
13
LED belt light
14
Extention pole lock button
15
Vaccum cleaner connector
16
Extention pole
lock lever
SAFETY
General Power Tool Safety Warnings
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your
mainsoperated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
Carrying power tools with your finger on the switch or
energizing power tools that have the switch on invites
accidents.
●
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal
injury.
●
Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in