Worcraft CLB-S20Li, Manual

Page: 34 / 54

5
·
Only use the equipment fully assembled.
·
Only use spare parts and accessories supplied and
recommended by our Service Centre.
·
Switch off the equipment: - when not using, transporting, or
leaving the equipment unsupervised; - when cleaning or
performing maintenance, or changing accessories;
- in the event of contact with foreign objects or abnormal
vibration.
·
Keep all air intakes free of debris.
Warning! The power tool generates a magnetic field
during operation. Under certain circumstances this
field may actively or passively impact medical
implants. To reduce the risk of serious or fatal injuries,
we recommend persons with medical implants consult
their physician and the manufacturer of the medical
implant before using this equipment.
MOUNTING AND OPERATION
ASSEMBLY
To prevent accidental starting that could cause
serious personal injury, always remove the battery pack from the
product when assembling parts.
ASSEMBLING THE BLOWER TUBES
The blower tube can be installed on the blower without usig any
tools.
Sliding the blower tube onto the blower housing until the lock
button clicks into place, See fig 4.
Insert the concentrator nozzle onto the blower tube until the
concentrator nozzle lock button clicks into pace. See fing 5.
(Concentrator nozzle is used to increase air flow in tight areas:
flower beds, under decks,etc.)
CHECKING THE BATTERY LEVEL(See fig 3)
Press the bottun on the battery pack, and the light will shine,
Detail level show in the fig 3.
ASSEMBLE OR DISASSEMBLE THE BATTERY PACK ONTO
THE MACHINE(See fig 6&7)
Insert the battery pack on to the machine according the direction
showed in fig 6.
To disassemble the battery pack, just press the knob on the
pack and then pull backward. See fig 7.
STARTING AND STOPPING THE blower (see fig 8)
To start the blower, place the on/off switch in the ON (1)
position.
To stop the blower, place the on/off switch in the OFF(0)
position.
WORKING ADVICE
Battery tools are always in oprating condition.
Therefore, switch should always be in the OFF position when
not in use or carrying at your side.
To keep from scattering debris, blow around the outer edges
of a debris ie. Never blow directly into the center pie.
To reduce sound levels, limit the number of piece of
equipment used at any one time.
Use rakes and brooms to loosen debris before blowing. In
dusty conditions, slightly dampen surface when water is
available.
Conserve water by using power blowers instead of hoses for
many lawn and garden applications, including areas such as
gutters, screens, pations, grills, porches, and gardens.
Watch out for children, pets, open windows, or freshly washed
cars, and blow debris safely away.
After using blowers or other equipment, clean up!
Dispose of debris properly.
NOISE/VIBRATION INFORMATION
The vibration level given in this information sheet has been measured in accordance with a standardised test given in EN 60335
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it
is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify
additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
MAINTENANCE
Make sure that the machine is not live when carrying out maintenance work on the motor. Regularly clean the machine
housing with a soft cloth, preferably after each use. Keep the ventilation slots free from dust and dirt. If the dirt does not come off
use a soft cloth moistened with soapy water. Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts. The machine requires no additional lubrication.
ENVIRONMENT PROTECTION
In order to prevent the machine from damage during transport, it is delivered in a sturdy packaging. Most of the
packaging materials can be recycled. Take these materials to the appropriate recycling locations. Take your unwanted
machines to your local dealer. Here they will be disposed of in an environmentally safe way.