Worcester Sense ll, Operating Instructions Manual, Page: 37 / 48

37
Calling up information about the system
Sense ll – 6 720 812 775 (2014/10)
Menu item: Outdoor temp.
This menu is only displayed if an outside temperature sensor is
installed.
The currently measured outside temperature is displayed in
this menu. In addition, a diagram of the outside temperature
profile for today and yesterday (from 00:00 to 24:00 in each
case) is displayed here.
Menu: Internet
This menu is only available if at least one communication
module is installed.
Menu: System information
This menu is only available if no cascade module (e.g. MC 400)
is installed. Information is only displayed under the individual
menu items if the corresponding parts of the system are
installed.
Information about solar yield
▶ If the standard display is active, press the info key to open the info menu.
▶ Turn the selector to highlight
Solar .
▶ Press the selector to open the Solar menu.
▶ Turn the selector to highlight
Solar yield
and press the selector.
The solar yields for the current week are displayed.
▶ Turn the selector to switch the display between solar yield for the current week, solar
yield for last week and total yield of solar system since commissioning.
Operating the appliance Result
Table 34 Call up information about the solar system
6 720 815 237-55.1O
Operating the appliance Result
Calling up the outside temperature profile
▶ If the standard display is active, press the info key to open the info menu.
▶ Turn the selector to highlight
Outdoor temp. and press the selector.
▶ Press the selector.
The diagram shows the outside temperature profile for the last 2 days (more detailed
information,

Chapter 6, page 34).
Table 35 Information about the outside temperature call up
6 720 815 237-56.1O
Menu item description
IP connection Status of the connection between
communication module and router
Server connection Status of the connection between
communication module and Internet
(via the router)
SW version Software version of the
communication module
Login data Login name and password for the login
into the App to operate the system via
a smartphone
MAC address MAC address of the communication
module
Table 36 Information about the Internet connection
Menu item description
Burner starts Number of burner starts since the
system was commissioned
Burner runtime Hours run of all system parts recorded
by the heat source
Water pressure Displays the operating pressure at the
water pressure sensor
Operating code Displays the appliance status in the
form of an operating code
(e.g. standby period active) or a fault
code
Table 37 System information